P & R Machine Shop Business Liquidation - Greensburg, PA
Preview: June 22nd, 3:00 - 6:00 PM
Ends: June 23rd, 6:00 PM
Removal: June 25th, 11:00 - 6:00 PM *AND* June 26th, 11:00 - 6:00 PM
952 W. Pittsburgh St. Greensburg, PA 15601
15% Buyers Premium applies
Lic #AY 002064
| Trailer - 17 1/2ft box - Door Ramp - Dual Axle |
| Polaris Ranger 570EFI - 4x4 - With Plow - Full Cab with Doors - Dump Bed - *Only 118 Miles* |
| 2021 Crown Encore Forklift C5 1050-50 - Propane - 3 Stage Mast - 4550lbs Load Capacity - *Only 197 Hours* - Reserved For Load Out, Buyer will pick up alternate day |
| Schou Model 400 Surface Grinder - Converted to CBN - Will Handle 6ft Material - 18in Milling Head - 230 Volts - 60HZ - SN:14 - Machine Number 167 - *Buyers will need rigging for load out* |
| Rottler Boring Machine F10A - Tons of Tooling - V8 Fixture - Air Float Head - with Dust Collection System - 6 Different Size Heads - Mac Tool Box Not Included |
| 2006 Sunnen SV10 - Vertical Cylinder Honing Machine - Super Abrasive Heads - Tons of Tooling (see pics) - SN: 2E1-1088 - With Honing Heads, Stones and Stone Holders |
| Sunnen Seat and Guide Machine - SGM-1500 - Tons of Tooling (see pics) - with Electronic Tool Setter and Valve Guide Pilots |
| 2019 T&S Dynamic Balancer - Probal 500 - Tons of Tooling (see pics) - Tool Chest Sold Separately |
| Chromolax Immersion Heater and Tank - Tank is Approx 64”x40”x40” - Used as Hot Tank - Comes with a New In Box Backup Chromalox Heating Element |
| Vectrax CL Series Mill - Digital Read Outs - Tons of Tooling (see pics) - 230 Volts |
| LeBlond Lathe - 1 Phase - Tons of Tooling (see pics) |
| Dake 50 Ton Press - 60 HZ - Tons of Tooling (see pics) |
| Sunnen CH100 Horizontal Line Hone - 9 Mandrel with it - Red Cabinet Not Included |
| Sunnen Precision Honing Machine - LBB-1810 - Power-Stroked - Tons of Tooling (see pics) |
| Kansas Instruments Jet Spray Washer - Model D54G - Gas - 10hp - 3phase - Approx 5’ Working Height - 36” Turntable |
| Tobin-Arp Pin Fitting Machine - Model PM - Tons of Tooling (see pics) |
| Sunnen Cylinder Head Work Bench CHW 40 - With Vacuum Assembly |
| Serdi GP1000 Hydraulic Grinding / Milling Machine - Rottler Dual Axis Table |
| Super Flow SF600 Pro Port Cylinder Heads - Flow Bench |
| Delta 6000 Pressure Testing Stand - Lots of Tooling (see pics) |
| Tobin-Arp TA15 - Line Boring Machine |
| Reid Surface Grinder - Model No 2 - 3 - 7”x16” - 115v - 55amp |
| iDL HS 4350 Belt Surfacer - 60 Gal Cooling Tank - Extra Belts |
| Crank Shaft Polishing Stand |
| Granite Inspection Table - 4ft x 40in x 39in tall - Granite 6in Thick |
| ACE Heat Cleaning Oven - Model 230-RKG - Includes All Paperwork and Service Records |
| USMW Shot Blaster - Model B-44 - With Dust Filter/Bag Shaker - Shot Impeller - Steel Liner with 44” Basket - 10hp - 3phase |
| Ward Equipment Astroflux - Magnetic Particle Inspection Machine |
| Raptor Blaster Sandblasting Cabinet - RB3630 Slurry Cabinet |
| Precision Metal Works Parts Washer - Model 412-ST - 230v - 3phase - 800lb Capacity - 48” Working Height - - 26” Turntable Width |
| Safety-Kleen Model 250 Solvent Recycling Parts Washer |
| Snap On Tool Box Setup - Includes Tool Storage Top Chest, Tool Storage Mid Section, Tool Storage Roll Cab, Tool Storage Hang On and Tool Storage Locker - Finished in the exclusive “Extreme Green” - Gas Strut Flip Up Lid - HD Casters - Deep Drawer Configuration - RARE Hard To Find Unit! |
| Snap-On Tool Chest - 54in x 2ft x 40in - On Wheels - 11 Drawers |
| Snap-On 54” Double Bank Roll Cab Tool Box - 54”x29” - Lock & Roll Latching System - Premium Masters Series - Heavy Duty |
| Hobart Micro-Wire MC-300 300amp Constant Voltage DC Welder - AGH 27 Wire Feeder - Gas Tank Not Included |
| Westinghouse WSH Arc Welder - Direct Current - 220v - 3ph - 60 Cycle |
| Miller TIG Setup - Dynasty 280 Welder & Miller Coolmate 1.3 - On Snap On Rolling Welding Table w/ Cabinet - Includes Some Welding Supplies - Cronatron Tig Wire - Argon Tank Not Included |
| Combo Sander - Vertical Belt and 9” Disc - 3/4 HP Motor - Single Phase |
| Heavy Duty Strel Table - 9’ |
| ULINE Banding Cart Loaded With Banding and Wrapping Supplies |
| Milwaukee M18 Compact 1 Ton Chain Hoist - w/ One Key - Never Used - with 2 Batteries and Charger - Milwaukee Packout Storage Box |
| Rolling Engine Mount Cart |
| Hand Crank Scissor Lift Work Stand |
| 1 Ton Engine Stand - Collapsable |
| Tank Dolly and Torch Accessories - Tanks not included - Gauges - Leads - Etc |
| Engine Stand |
| Engine Stand and Cart |
| Industrial Cart - 6’x4’ |
| Pallet Jack |
| Pallet Racking - Teardrop Style - 3 Tier - 8’ Width |
| Metal Cart on Wheels - 3ft x 2ft x 3ft |
| Proto Tool Cabinet - 11 Drawers - Approx 4ft |
| Steel Table - 6ft x 3ft - Contents Not Included |
| Steel Table - 6ft x 3ft - Contents Not Included |
| Steel Table - 6ft x 3ft - Contents Not Included |
| Sunnen Rod Heater CRH-50K - 115 Volts |
| Sunnen BP-10 Bench Press - 115 Volts |
| Metal Work Bench - 182in Long x 3ft deep - *Vice / Tool Chest and Contents Not Included* Will need Removed at End of Day |
| Trans power Heavy Duty Drill Press 12 Speeds |
| Yates American Dual Grinder - Belt and Disc - With Extra Sand Pads |
| Cincinnati Dual Bench Grinder |
| Dake Band Saw - Model SE912 - Weight 160KGS |
| Metal Work Bench - 6ft x 28in - Contents Not Included |
| Contents of Bench - Grinders - Etc |
| Craftsman Tool Cabinet - 30in x 24in |
| Heavy Duty Steel Table |
| StrongHold Heavy Duty Tool Storage Cabinet - 2 Doors and 4 Drawers - 6’ Wide - 65.5” Tall - Model # FM-22159 |
| MAC Tools Rolling Tool Chest - 7 Drawer - 28” Width - 41” Height |
| Pair of Huot (5 Drawer on top of 3 Drawer) Stacking Toolboxes Loaded w/ Metalworking Drill Bits - Various Sizes |
| 8 Drawer Toolbox Loaded w/ Metalworking Drill Bits of Various Sizes and Types |
| Huot 4 Drawer Tool Box Loaded with Assorted Drill Bits |
| Huot 4 Drawer Tool Box Loaded with Assorted Taps and Bits |
| 50 plus Taper Shank Drill Bits |
| Assorted Metal Working Tools - Pipe Taps - Thread Cutting Taps - Etc |
| Contents of 2 Shelves Including Drill Bits - Expanding Reamers - Pilot Reamers - Etc |
| Husky 15 Drawer Rolling Tool Chest - 72” Width - Stainless Top - Soft Close Drawers - Heavy Duty - 120lb Capacity PER DRAWER - Electric Plug Ins on Side |
| Coffing Model JLC 1/2 Ton Chain Hoist |
| Budgit Air Hoist |
| Industrial Cart |
| Metal Work Table - 5’ Width Contents not Included Must be Removed After 4 on Removal Day |
| Locker Unit - 6 Lockers - 78” Height - 36” Width |
| Delta 6200 HD Cap and Rod Grinding Machine - With Work Table w/ Vise |
| Kwik-Way Cylinder Boring Machine - Ser. FL 1010 |
| Hose and Reel |
| CM 1/2 Ton Chain Hoist |
| Manning Maxwell & Moore “Load Lifter” Freestanding Jib Crane - With Coffing JLC 1/2 Chain Hoist - 1,000lb - To Be Disassembled and Removed by Buyer - Beam Length Is Approx 9’ - Height from floor to top of beam is 100” |
| Sunnen TS-100 Tool Sharpener |
| Metal Work Table with Stainless Top and 4 Drawers - 6’ |
| Cylinder Head Work Table and Accessories - Valve Seat Grinding Tools - Honing tools - Pneumatic Wrenches- Etc |
| Kansas Instruments GPC-30 Parts Cleaner |
| Pioneer Valve Spring Insert Cabinet and Hardware |
| Sunnen VR-6500 Valve Grinder - Mounted on Sunnen Work Station and Cabinet |
| Dayton Dual Bench Grinder - 8” |
| Metal Work Table - 6’ |
| Reed Mfg Bench Vise |
| Electro Arc Metal Disintegrator - Tap Burner Machine - Model 2-SA |
| MTE Master Tool & Equipment Model SO 35 Tempering furnace |
| Approx 9'x8'x40" 3 Tier Pallet Racking |
| Comet Chain Hoist - 1/8 Ton |
| Intercomp Valve Spring Tester |
| 72" Caliber |
| Snap On Impact Gun |
| Snap-on 1/2” Ratchet and Breaker Bar |
| Snap On Mini Ratchet Socket Set With Case |
| Snap On Ratchet Assortment-Sockets-Socket Holders |
| Snap On Ratchet/Sockets Assortment |
| Snap On Deepwell Sockets |
| Snap On Deep Well Sockets |
| Snap On Deep Well Sockets |
| Snap On Ratchet Extensions |
| 3/8 and 1/2 Drive Torx Sockets, 2 Allen Wrench Sockets 17m & 5/8 |
| Snap-on Sockets |
| Snap On 1/2” Drive Metric Sockets |
| Snap On Standard Swivel Sockets |
| Snap On Metric Set |
| Snap On Reducer Set |
| Snap On Standard Socket Set |
| Snap On Metric Hex Bit Sockets |
| Engine Blue Prints - Timing Tools - Catalogues |
| Vac Master 5 Gallon Wet Dry Vacuum |
| Snap On IMFM Heavy Duty Impact Sockets |
| Snap On Metric Impact Swivel Sockets |
| Steel Can 3’H. |
| Vintage Boring Bar 24”H. |
| ap On Metric Sockets In A Proto Tools Carrier |
| Snap On Metric IMFM Sockets |
| Snap On Metric Sockets |
| Engine Pre-Lubricator |
| Diesel Transfer Tank |
| Snap On Pry Bar Assortment |
| Snap On 55IP Torx Sockets |
| Snap On 3/8 Hex Bit Set |
| Snap On SL Socket Set |
| Snap On T55 Torx Bit Set |
| Snap-on Sockets |
| Snap On 3/8” Drive Deep Well Sockets |
| Snap On - Craftsman 3/8 Drive Socket Assortment |
| Snap On Swivel Sockets 3/8 6point - 12Point |
| Sockets- Swivel Ratchets- Extensions - Ratchets |
| Snap On TECHANGLE Electronic Torque-Angle Wrench |
| Snap On Electronic Torque Wrench |
| Gear Wrench Electronic Torque Wrench |
| Snap On Nut Driver - Ratchet- Sockets- Swivel Sockets |
| Snap On Metric Wrenches 10 To 15 mm |
| Snap On Snap Ring Pliers |
| Snap-On 1/2-In Sockets |
| Snap On Pliers |
| Snap-on 1/2-in Socket Set |
| Snap-on 1/2-In 6-point Impact Sockets |
| Snap-on 1/2 in. 6 point Deep Well Impact Sockets |
| Snap-on Speed Handle, Blue Power Swivel Ratchet. 2in 1/2 in Extension, 3/8 in Breaker Bar w 1/2in Socket |
| 36 in 1/2 Breaker Bar, 30 in Extension, 24in Wratch |
| 1/2 in Drive Metric 12 Point Socket Set, 3 6 Point Sockets, 3/8" to 1/4" Adapter |
| 3-in 4-in and 10-in 1/2 Drive Impact Extensions, Impact Swivel Socket 5/8-in 1/2in Drive Impact 12 point Socket. |
| Wrist Pin Bushing Installation Parts |
| Large Lot of Rubber O-Rings, Rubber gasket Material, Large O-Ring Gauge |
| Snap-on 1/2” Ratchet |
| Lot of Five Camshafts |
| 1/2" Drive, 1 Universal Extension, 1 Swivel Extension, 1 1/2" to 3/8" Adapter, 11m and 12m Snap-on Deep Well 12p Sockets. |
| Set of Snap-On Deep Well Metric Sockets 12p |
| Set of Snap-on Deep Well Metric Sockets 6p |
| Set of Snap-on 1/2" Drive 12-point Metric Sockets |
| Snap-on 1/2 Drive 6-p Metric Impact Sockets |
| Snap-on SAE Impact Deep Well 6-p Socket Set |
| 7 piece Socket Set assorted 6 and 12p, 3/4" to 1/2" Adapter, 1/2" Drive Ratchet. |
| Snap-on Sockets |
| 1/2" Speed Driver, 8 Misc. Sockets, 4" Extension, Snap-On Ratcheting Breaker Bar Adapter, 1 Angled Extension. |
| Approx 24" Snap-On Breaker Bar w 24" Extension. |
| Snap-on 1/2" Drive Deep Well SAE 12p Socket Set |
| Snap-on 1/2" Drive SAE 6p Deep Well Socket Set |
| Snap-on SAE and Metric Hex Bit Sets |
| Snap-on Precision Phillips Head Set, Torx Wrench Set and Blade and Phillips Set, Dremel Engraver Tool. |
| Snap-on 2 Torx Wrench Sets. 1 Long. 1 Short |
| 4 Snap-On Long hex bits, 1 Snap-On Long Torx Bit |
| Set of Vintage Mac Tool Box Wrenchs, S et of Mac Tool Ratcheting Box Wrenches |
| Snap-on Ford Cylinder Head Wrench, L-shape Wrench and Box Wrenches |
| Snap-on Metric Line Wrenches. |
| Snap-On Metric Box Wrench Set |
| Snap-On 1/2in Drive 24mm Deep Impact Socket. [ 1] |
| Snap Snap-on 1/4" Drive Metric Deep Sockets, Universal Type Metric Sockets, 1/4 Breaker Bar and Extension |
| Snap-On E16 Torx Bit, 1/2" Socket, 9 Hex Bits 1/2" Drive, T55 & T60 Tor Sockets, 3/8" to 1/4" Adapter, 1/2" to 3/4" Adapter |
| Snap-On Pneumatic 3/8" Impact Driver |
| Snap-On. 3/8 Air Ratchet |
| Snap-on 4 Sets of Picks and Hooks |
| Snap-On Metric Hex Bit Sockets 3/8" Drive |
| Snap SAE Hex Bit Sockets 1/2" Drive |
| Assortment of Snap-on Phillips and Blade Screwdrivers |
| Snap-on Male and Female Square Drive Sockets |
| Snap-on 1/2" and and 3/8" Screwdriver Socket Assortment w 1/2" and 3/8 Hammer Drivers |
| Snap-On Female Torx Wrench Set |
| Snap-on Torx Wrench Socket Sets |
| Snap-On Metric Hex Wrench Set |
| Snap-on 2 Needle Nose Plier and Cutter Sets |
| Snap-on Dial Torque Torq O Meter Wrench 3/4" Drive |
| Snap-On 1/4-in Drive Socket Set w Extensions, Ratchets, Breaker Bars, Beaker Bar Ratchet Attachment, Magnetic Socket Holder and Miscellaneous Type Sockets |
| Snap-on 1/4-In Impact Sockets |
| Snap-on Open eEnd and Speed Ratchet Set |
| Snap-on 3/8" Drive Metric Open-End Crowfoot Wrenches |
| Snap-on 3/8" Drive SAE Open-End Crowfoot Wrenches |
| Snap-On Ratcheting Combination Wrenches. |
| Snap-on SAE Combination Wrenches, |
| SK Screwdrivers, Phillips and Blade Set w Additional Misc Screwdrivers |
| Snap-on FAR25 1/4" Air Ratchet |
| Induction Innovations Mini-Ductor II (MD-700) |
| Various Sized Mac, Blue Point, Craftsman Wrenches |
| Mac Tools Socket Set and Other Various Sockets |
| Cornwell Wrenches SAE and Metric Various Sizes |
| 18.5x7x5" Snap-on Toolbox - Various Tools - Hardware - Gages |
| Snap-on Adjustable Plier Wrenches |
| Snap-on Battery and Charger |
| Snap-on Breaker Bars |
| Snap-on Socket Set |
| Snap-on Socket Set |
| Snap-on Socket Set |
| Snap-on Swivel Head Wrenches |
| Snap-on Socket Set |
| Snap-on Pliers - Wire Cutters |
| Snap-on Alan Sockets |
| Snap-on Socket Wrenche - Mac Wrench - Various Attachments |
| Snap-on Torque Multiplier |
| O Rings - Gaskets- Drive Belt |
| Snap-on Socket Set |
| Snap-on Socket Set 1 Missing |
| Snap-on Socket Set |
| Various Snap-on Sockets |
| Snap-on Battery and Charger |
| T Handle Alan Wrenches |
| Snap-on Wrenches - Drill Bits - Gauge Punches |
| Various Wrenches |
| Gauge Punches |
| 4' W Rolling Tool Cart Only Tools Not Included Must Pick Up After 4 On Removal Day |
| Snap-on Sockets |
| Contents Of 2 Shelves Includes- Cam Bearings Assortment |
| Snap-on Impact Drill |
| Snap-on Impact Drill |
| Snap-on Impact Drill |
| Contents On Top Shelf Includes Cam Bearings Assortment |
| Snap-on Impact Drill |
| Snap-on Vacuum Tester |
| Snap-on Wrenches |
| Various Sized Cornwell Pry Bars |
| Copper Washer Bushings |
| Various Tru-Fit Sockets |
| Craftsman and Other Wrenches |
| Mac Tools Impact Driver Set and Various Sockets |
| Ford Products Lot |
| Channel Lock - |
| Snap-on Pneumatic Air Gun |
| Snap-on Socket Set |
| Snap-on Socket Set |
| Snap-on Socket Set |
| Snap on Torque Wrench |
| Snap on Torque Wrench |
| Snap on Torque Wrench |
| Snap on Torque Wrench |
| Snap-on Drills - Charger - Tool Bag |
| Contents Of Shelves Includes- Push Rods - Bearings |
| Snap-on Air Gun |
| Snap-on T Hex Bits |
| Snap-on Bits |
| Vintage Snap-on Torque Wrench |
| Contents of Hardware Bins - Time-Sert Kit - Mini Springs - Thread Repair Hardware and More |
| Threaded and Unthreaded Pape Stock |
| Various Hardware |
| Brooms - Shovel - Dustpans |
| Hardware Storage 14.5×20.5x12.5 Various Hardware Included |
| Manley - Wiseco Pistons Need Repairs |
| Hardware Storage 18x6x14" Various Hardware Included |
| Hardware Storage 14.5×20.5x15.5 Various Hardware Included |
| Hardware Storage 14.5×20.5x15.5 Various Hardware Included |
| Hardware Storage 14.5×20.5x15.5 Various Hardware Included |
| Hardware Storage 14.5×20.5x12.5 Various Hardware Included |
| Hardware Storage 14.5×20.5x12.5 Various Hardware Included |
| Various Hardware |
| Hardware Bin Various Hardware |
| Hardware Storage 14.5×20.5x12.5 Various Hardware Included |
| Time-Sert Screw Thread Insert |
| Time-Sert Screw Thread Insert |
| Time-Sert Screw Thread Insert |
| Piston Ring Grinder With Diamond Wheel |
| Thread Repair Kit |
| Helicopter Save-A-Thread |
| Contents Of Drawer Includes Shaft Seals - Assorted Components |
| Hardware Storage 40" H 33.5" W Various Hardware Included |
| Caliper Assortment Includes Digital |
| Hardware Storage 40" H 33.5" W Various Hardware Included |
| Hardware Storage 40" H 33.5" W Various Hardware Included |
| Hardware Storage 40" H 33.5" W Various Hardware Included |
| Hardware Storage 40" H 33.5" W Various Hardware Included |
| Mop and Bucket |
| Engine Wrapping Material |
| BMW S54 Timing Tool Kit - Injector Puller Kit |
| Macros Spanner Wrench Set - Goodson VSP- 323 Valve Spring Puller - Astro LED Slim Light |
| Pin Inserts - Reducing Rings |
| Rear Blade - TDC - Guage and More |
| Hemi Test Cams |
| Ford Test Cams |
| Various Test Cams |
| Feeler Gauges - Ball Bearings- |
| Motor Oil ' Racing Assembly Grease - Jet Lube and More |
| Stop Leak Plugs |
| Steel Files - Taps - Tap Handle |
| Copper Wire and Other Hardware |
| Various Hardware |
| Various Hardware - Music Wire - Assembly Lube |
| Connecting Rod Vise |
| Various Engine Hardware |
| Various Lifter Lubricant and Assembly Lube - |
| HOLLANDS Steel Vise 14.5 |
| Timing Adjustment Tools |
| Master Harmonic Balancer & Pulley Installer |
| CORNWALL Chisels & Punches |
| Various Crankshaft Gears - Arch Punch - Pressing Rings |
| B Honda Cam Degree |
| Piston Ring - Cam Sprockets - Cam Bearing Tool |
| Punch Presses |
| Mallet - Hammer Assortment |
| Pistol Pump Oil Can Assortment |
| Crescent Wrenches- Pliers- Snap Ring Pliers- Needle Nose Pliers- Mini Vise Grip |
| Storage Bin Assortment Contents Included |
| Steel Motor Stand |
| nt On Shelves Includes- Vehicle Gaskets |
| LED Trouble Light |
| GM - Subaru Parts |
| Gasket Paper - Hemi Parts |
| Contents Of Shelves Includes- Push Rods - Bearings |
| ARP Bolts & Studs |
| ARP Bolts & Studs |
| ARP Bolts & Studs |
| Bolts & Studs Assortment |
| ARP Bolts - Studs |
| Full Set LS Main Bolts |
| Gates Timing Component Kit |
| Contents Of 2 Shelves Includes- Cam Bearings Assortment |
| Contents On 2 Shelves Includes- Cam Bearings Assortment |
| Contents On 2 Shelves Includes- Engine Bearings Assortment |
| Contents Of 2 Shelves Includes - Harmonic Balancer Sleeves |
| Contents On 2 Shelves Includes - Cam Bearings Assortment |
| Mitutoyo Outside Mic, 8-9 in |
| Contents On 2 Shelves Includes- Camshaft Bushings- Cam Bearings - Oil Seals - Washers |
| Mitutoyo Block Gage Set |
| Mitutoyo Depth Gage |
| Meyer Pin Gage Set |
| Starrett Inside Mics, 2-8 in - Crank Shaft Gage - Mounting Clamps |
| Mitutoyo 12-18” Outside Micrometer Set - Model 104-201 - With Interchangeable Anvils |
| Precise Rectangular Gage Block Set |
| Meyer Class Z Ping Gage Set |
| Vintage L.S. Starrett No. 122 Vernier Caliper |
| Norton Multi-Oilstone No. IM-313 Stone Sharpening Ststem |
| Starrett Micrometer Caliper - No. 224G - 6”-12” |
| Mitutoyo 18-24”” Outside Micrometer Set - Model 204-202 - With Interchangeable Anvils |
| Vintage L.S. Starrett No. 122 Vernier Caliper |
| Bearing Indicator Stand, Sharpening Stones and Scale |
| Starrett Long Stroke Dial Indicator |
| Sunnen GRM 9000 Retractable Dial Bore Gauge AND Starrett Mechanical Tubular Rod Inside Micrometer |
| Starrett Mechanical Depth Micrometer and Inside Micrometer Set |
| Assorted Lot - Starrett Dial Caliper - Daedal Precision Micrometer Heads - Mitutoyo 5”-6” Outside Micrometer |
| Pair of Mitutoyo Outside Micrometers - 6-7” & 7-8” |
| Mitutoyo Dial Caliper |
| Assorted Measuring Tool Lot - Fowler Calipers - Lufkin Mics - Interapid Disk Indicator |
| Power Punch Kit |
| Lufkin Inside Micrometer Set |
| Mitutoyo Nib Jaw Digital Caliper and Blake Precision Coaxial Dial Indicator |
| Lot of Assorted Starrett Height Gages |
| Lot of Assorted Machining Equipment - Telescoping Gages, Mics, Scales, Etc. |
| Lot of Assorted Indicators and Level |
| Lot of Assorted Gages - Ringmaster Gages and Dial Bore Gages |
| Powerhouse Table Vice |
| Starrett Set of Outside Mics - 0-1 up to 6 in |
| Mitutoyo Precision Reference Specimen 178-602 |
| Starrett Center Punch Set |
| Starrett Set of Outside Mics - 0-1 up to 6 in |
| Lot of Assorted Machining Equipment - LSM Valve and Spring Remover, Headband with Magnifying Lenses, Sharpening Stones, Incromics |
| Lot of Assorted Machining Equipment - Calipers, Indicators, Mics and Dividers |
| Concrete and Masonry Drill Bits |
| Lisle Cam Bearing Tool |
| Lot of Inside and Outside Starrett Mics |
| Starrett Outside Mics, up to 6 in |
| Assorted Hand File |
| Assorted Hammers and Metal Stamps |
| Assorted Hand Files |
| Lot of Spring and Valve Removers |
| Assorted Hand Files |
| Assorted Dial Indicators - Federal and Sunnen |
| Assorted Machining Equipment - Double Indicator Calibrator, Assorted Clamps, Surface Base |
| Assorted Manuals - Manley, SBI, Valvespring Guide |
| Lot of Allen Wrenches |
| Assorted Manuals |
| Assorted Machining Equipment - Incromics, Scales, Combination Square, Indicator |
| Lot of Assorted Kobalt Combination Wrenches, Metric and Imperial |
| Assorted Wrenches and Pliers |
| Assorted Machining Equipment - Combination Square, Filler Gages, Thread Gages, Etc. |
| Assorted Pliers and Wire Cutters |
| Head Conditioning Tools |
| Center Drills, Reaming Tools |
| Assorted Wire Brushes and Drill |
| Star Sockets and Extensions |
| Assorted Machining Equipment - Starrett Indicator, Metal Punch Set, Machining Level |
| Height Gage with Indicator |
| Outside Dividers and Depth Gage |
| End Mills |
| Allen Sockets, Standard and Metric |
| Metric and Standard Allen Wrenches |
| Chisels, Assorted Sizes |
| Assorted Punches |
| Valve Guide Cutters |
| Extension Ratchet and Sockets |
| Tap and Dye Sets, Coarse and Fine Thread |
| Cutting Heads, End Mills and Ball Bearings |
| Central Indicator, Reaming Tools, Extension Tubes |
| Eschenbach Illuminated Magnifiers, Metal Punches, Dowel Indicator, Magnifiers, Federal Dial Indicator |
| 9 in Calipers, Mag Base for Indicator, Indicator, Set of Outside Mic Standards |
| Valve Head Cutters |
| Assorted Chisels |
| Assorted Punches and Chisels |
| Air Gun and Chisels |
| Assorted Drifts and Chisels |
| Assorted Tools - 8 lb Short Handed Hammer, Hand Drill, Etc. |
| Lot of Assorted Industrial Cleaners and Lubricants |
| Set of Two Jack Stands |
| Sunnen Pin Fitting and Rod Reconditioner |
| Contents On 1RST 6 Shelves Of Rack Includes - SBI Seal Assortment |
| Manual and Digital Dowel Calipers |
| Keyway Broaches Standard Set |
| Contents On Bottom 4 Shelves Includes SBI Seeal Assortment |
| Dial Board Gage Series 200 |
| Contents Of 1ST 7 Shelves Includes SBI Seals Assortment |
| J&S Wheel Dresser |
| Assorted Drill Bits |
| Set of Assorted Taps, Coarse and Fine Thread |
| Assorted Pipe Taps, Coarse and Fine |
| Contents Of 6 Bottom Shelves Includes- Assorted Auto Components |
| Assorted Tapered Shank Drill Bits |
| Assorted Metal Files and Parallels |
| Contents Of Shelf includes Rolls Of Stainless Steel- Stainless Steel Shafts |
| Wooden Machinist Tool Box and Drawers - Reamers, Tapered and Straight - Pins, Tapered and Straight |
| Assorted Taps, Fine and Coarse Thread |
| Assorted Tapered Shank Drill Bits |
| Lot of Assorted Taps |
| Metal Rack, Contents NOT Included, 7 ft x 3 ft x 3 ft |
| Metal Cabinet, Contents NOT Included, 50 in x 54 in x 28 in |
| Assorted Oil Guns and Sprayer |
| Sprayers, Oil Guns and Bernzomatic Torch |
| Contents of Shelves - NAPA Motor Oil, Valve Stem Guides, Lifters, Compressor, Etc. |
| X |
| Tooling |
| Tooling |
| Tooling |
| Tooling |
| Tooling |
| Assorted Tools and Equipment - Taps, Center Tool, T Wrench |
| Specialty Machinist Tools |
| Volvo and Mack FM12 Injector Nozzle/Cup/Sleeve/Tube Remover and Installer Kit |
| Assorted Injector Tooling, Thread Repair Guide |
| Tooling for Pulling Valve Seats |
| Dial Bore Gage |
| Dial Bore Gage |
| GearRatchet Vortex Socket System, Jacks, Lawson Angle Allen Wrenches, Standard and Metric |
| Assorted Drill Bits and Tap Extractors - Right and Left Hand Drill Bits |
| Battery Maintainers and Charger |
| Mac Tools Deep Well Socket Set 1/4 in Drive, Metric and Standard, 3/16 to 9/16 |
| Lapping Oil, Lighter Fluid, Lead |
| Various Sized Pins |
| Mag Machine for Identifying Cracks |
| Tool Box |
| Snap-On Hammers |
| T Allen Wrench Metric Set and Assorted Screwdrivers, Files, Etc. |
| Chuck T Wrenches and Chucks |
| Sanding Pads, Drill Chucks, T Wrenches, Ball Gages |
| Modeling Clay and Earmuffs |
| 2 Mac Tool, 1 Ingersoll Rand Pneumatic Tools |
| Cryospray Torch Alloy Sprayer CW2602 |
| 1 Snap-on Pneumatic 90-degree Angle Die Grinder, 2 Ingersoll Rand Pneumatic 90-degree Angle die Grinders |
| Queso Valve Stem Seal Inserter, Deburring Knife + |
| Hitachi 1/2" Drill |
| Cornwell Tool and misc 4.5" Pliers, Cutters |
| Flexible Honing Brushes Cylinders |
| Ultra Cal V Micrometer |
| Rubbermaid Comercial Mop Bucket With Mop & Extra Mop Heads |
| 84x30x24" Cabinet |
| Assorted Drill Bits |
| Pneumatic Spring Compressors |
| Valve Seat Grinder |
| Shop Vac |
| Set of C Clamps |
| Porter Cable Tiger Saw with Multiple Blades |
| Drill |
| Rubber Expansion Plugs |
| Stitch Pins, Straight and Tapered with Air Guns |
| Lot of Honing Stones |
| Sunex 14 Piece SAE Combination Wrench Set |
| Coffing Manual Hoist Trolley ET-10-A |
| Assorted Shim Stock - Various Sizes |
| Assorted Grinding Wheels and Wire Brush |
| Lot of Assorted Tape |
| Assorted Tools - 1/2 in Ratchet, 8 in Sander, Wrenches, |
| Shelves and Contents - Lubricant, Cleaner, Hammers, Etc. |
| Set of Two Shop Vacs |
| Dolly |
| Snap-On Tools - Snap Ring Pliers, Ratchet, Socket and Speed Wrench |
| Chuck Adapter |
| DeWalt DCD777 Cordless Drill Driver and Charger |
| VIM Tools Impact VI6 10 Piece SAE Hex 1/2 Cut Driver Set |
| Hand Grinders |
| Lot of Air Tools - Chisel Gun, Air Nozzle, Air Drill, Air Grinders |
| Assorted Tools - Wrenches, Screwdrivers, Etc. |
| Heavy Duty Dovetail Machine Vice |
| Air Tools - Air Grinders and Drill |
| Heavy Duty Dovetail Machine Vice |
| Contents of Shelf - Honing Equipment |
| Retaining Ring Tool - Snap Ring Pliers Assortment |
| 26.5x8.5x13.5" Toolbox |
| Wire Strippers - Wire Cutters- Screwdrivers |
| Rolling Tool Cart 34x18x24" |
| Proto Litt Aluminum Ratchet With Extensions - Sockets |
| High Torque Low Rpm Electric Drill |
| Pliers - Ring Pliers |
| T-Mate Wrench Set |
| Craftsman 19gal Shop Vac |
| Williams - Mac- Large Sockets |
| Gages and Attachments |
| Industrial Work Desk 50x30x42" with Magnetic Light |
| Step Ladder |
| Proto Large Sockets |
| Sander Disks - Telescoping Mirror- Sandpaper - Scissors |
| OZAT Large Sockets |
| Snap On Large Sockets |
| Mac Tools Chain Wrench Set - Smith Tool Chain Apart |
| Bolts - Sockets- Fastners |
| Pnuematic Grease Attachments |
| Proto Large Sockets &Extentions |
| Rechargeable Trouble Light |
| Cylinder Reamer Tool - Timing Light - Razorblades - Drill Bits |
| Blue Point Pnuematic Drill With Attachment |
| Bosch Corded Ratchet- Magnum Corded Drill |
| Black&Decker Corded Saw - Craftsman Hand Saw |
| Snap On Digital Video Scope Camera |
| Assorted Sockets - 1 3/8 in Drive |
| Assorted Wrenches |
| Assorted Sockets |
| Clamp Assortment |
| Assorted Hardware |
| Wrench Assortment |
| Eastwood corded Tungsten Grinder |
| Pry Bar Assortment |
| Buss Fuses - Fuse Puller |
| THB Air Sprayer With Tips |
| Drill Bits - Catalogue Assortment |
| TPI Industrial Electric Fan 30”Diameter |
| Wooden Ladder 16’ |
| Fiberglass Aluminum Ladder 24’ |
| Coffing JLC 1 Ton Electric Hoist |
| Mallets- Hammers - Hardware |
| Pnuematic Grinders - Brushes - Grinding Wheels |
| Vintage Punches |
| Grinding Wheels - Sanding Blocks - Aircat Pneumatic Tool |
| Various Vintage Punches |
| Various Files |
| Various Punches |
| Wd-40 - Sd-20 - Oil Cans & More |
| Vintage Steel Punches |
| Ingersoll-Rand |
| Wire Wheel Brushes |
| Box of Various Tools |
| Trevor VFP 50 |
| Industrial Bottle Jack |
| 80" Cabinet Contents Included Various Air Lines - Hose Clamps - Hardware |
| Chains Various Lengths |
| Industrial Vice |
| 8' Werner Step Ladder |
| Wire - Tubing Washers - Widgets - Clamps - Hammers & More |
| Retractable Air Hose |
| Retractable Air Hose |
| Tap & Die Sey |
| Hole Puller Set |
| Dowel Puller |
| Industrial Pipe Wrenches |
| Vintage Tap and Die Set |
| Circular Saw |
| Pipe Clamps |
| Blind Hol Bearing Puller Set |
| Vintage Tap and Die Set |
| Pneumatic Tools |
| Pneumatic Drill |
| Various Clamps |
| Levels - Bolt Cutter - Pry Bar |
| Pneumatic Tools |
| 80x48x24" Cabinet Contents not Included |
| Grinder Hardware - Brushes- Flap Wheels - Drums |
| Parts Cabinet - Parts - Grinders - Heat Gun |
| Antifreeze - Certanium - Temp Sticl |
| Solder - Regulator - Welding Rods |
| Welding Helmets - Mig Regulator - Oil Can |
| Industrial Vice |
| 2 Industrial Central Tool Model 97355 3' Rachets 70" Breaker Bar |
| Welding Extention Hose - Industrial Extention Cord |
| Various Size Grinding Wheels |
| Welding Cord with Quick Connectors |
| Industrial Grinder |
| Air Gun 3/4 in and Pressure Gage |
| Industrial Extenda Light |
| Welding accessoriesA |
| Industrial Dolly |
| Cutters and Pliers |
| Various Sized Punches |
| Power Extractors |
| Sparta Wrenches |
| Snap-On Collet Sets |
| Bolt Extractors, Assorted Sizes |
| Chisels |
| Allen Extension Sockets |
| Assorted Chisels |
| Half Inch Air Guns |
| Assorted Chisels |
| Hammers |
| Box End Wrenches |
| Assorted Wrenches |
| Assorted Box End Wrenches |
| Assorted Wrenches |
| X |
| Vise Grip Set |
| Mac Tools Vice Grips |
| Tin Snipe, Wire Cutters, Pliers |
| Assorted Screwdrivers and Central Tool Wrench Keys |
| Assorted Allen Wrenches |
| Sockets- 1/4 in to 5/8 in, Assorted Allen Wrench and Regular Sockets |
| Socket Set - 3/8 - 1/4 in to 7/8 in |
| Pry Bars |
| Two Sledge Hammers - 10 and 8 lbs |
| 8'x10'x3' Industrial Shelf Contents Not Included Must Be Removed After 4 on Removal Day |
| SPRAY Washer 35B-ES Prep Clean |
| Variety Of Engine Blocks |
| Two Sledge Hammers - 10 and 20 lbs |
| Organizer Bins Full of Plumbing Supplies |
| Tool/Parts Chest36x20x16" |
| Heavy Duty Pry Bars |
| All Purpose Absorber |
| Miscellaneous Steel |
| Tubing and Various Steel |
| Various Steel Tubing |
| Manual Lift |
| Lot of Various Wire |
| Steel Brackets- Vintage Javks |
| Industrial Vice |
| Industrial Vice |
| Industrial Vice |
| Industrial Hoist |
| Daytona 1400 Watt Generator |
| Bins - Air Lines - Extention Cord |
| Mineral Spirits - Chevron Grease - Gas Can - Spindle Lube |
| Miscellaneous Steel |
| 7' Shelf Contents Included Various Hardware |
| Drums Mineral Spirits/Solvent/Mix - Rack - 5 Gallon Buckets |
| Rake - Hole Digger - Industrial Brooms - Prybar |
| Rack7'x40"x10' Approx Contents Included |
| Tier Rack 72x50x48" Approx |
| Drums |
| Contents Of Shelf includes Cylinder Sleeves |
| Box of WD-40 - Cable Ties - Racing Grease |
| Contents Of Shelf includes Cylinder Sleeves |
| Contents Of Shelf Includes Piston Rods |
| Contents Of Shelf Includes Cylinder Sleeves |
| Contents Of Shelf Includes- Fastners- Rocker Arm Studs |
| Contents Of Shelf Includes- Springs - Conecting Rod Parts |
| Contents Of Shelf Includes SBI Guides |
| Contents On Shelve Includes Ballast - Fuses- Wire Brushes- WD-40 - 10-30 Oil |
| Contents Of Shelf Includes Ford Test Cams - Subaru Cams |
| Contents Of Shelf Includes Surveillance Camera Items- Boxes |
| Contents Of Shelf Includes- Engine Valves - Spring Kits |
| Roller Extentions |
| Contents Of Shelf Includes Assorted Office Supplies |
| Contents Of Shelf Includes Assorted Automotive Engine Chemicals |
| Contents Of Shelf Includes P&R TShirts - Hoodies Assorted Sizes |
| Contents Of Shelf Includes Assorted Automotive Engine Chemicals |
| Contents Of Shelf Includes Tap-Con - Sheet Metal Screws- Flexzilla Air Hoses - Windex - Toilet Cleaner |
| Contents Of Shelf Includes- Paper Towels- Toilet Paper |
| Contents Of Shelf Includes Vintage Hammer Drill - Trouble Light - Extension Cord - Lynch Pins - Bungee Cords |
| Contents Of Shelf Includes- Bug Spray Assortment- Oil - Additives- Tape Assortment |
| Various Hardware |
| Various Hardware |
| 2 Tarps and Sweeping Compunt |
| Shop Vac and Filters |
| STORM-VALCUN Belt Polisher |
| Hoses |
| 2 Chainsaws |
| Creeper |
| CT-20 |
| 4 Drawer Filing Cabinet |
| Vintage Plumbing Equipment |
| Oxygen and Other Tanks |
| 2 Empty Oil Cans 27" |
| Lot Of Shovels |
| Tool Bucket - Clippers - Level - Saw and More Included |
| STHL Leaf Blower & Attachment - Gas Cans |
| 4 Cylinder Sleeves |
| Sherman Williams Acrylic Coatins - Various Pain and Primer - Painters Plastic |
| Caulking Guns - Paint Rollers - Roller Pan |
| Various Engine Enamel -Various Caulking |
| 5 Engine Blankets |
| Charlie Bown Christmas Tree - 10" Snowman - Stuffed Christmas Moon |
| Rock River Toolbox 22x12x9" |
| Filing Cabinet - 15 in x 52 in x 27 in |
| Various Cylinder Sleves |
| Magic Chef Fridge and Freezer |
| Lot of Five Folding Chairs |
| Royal Crosscut HG120 Paper Shredder |
| Drawer Set - 15 in x 18 in x 23 in - Internet Modem NOT Included |
| Brother Genuine Ink & Tower HL-L2370DW Copier |
| Contents of Shelf - Engine Manuals and Other Books |
| HP OfficeJet Pro 6978 Copier |
| HP PC with Intel Core i7 Processor |
| Two Office Chairs |
| Desk and Cabinets 60 in x 84 in x 30 in - Includes Contents, but NOT Monitor |
| HP 27ea Monitor |
| Engine Manuals and Stand |
| Assorted Engine Books and Manuals |
| Assorted Engine Manuals and Books |
| Contents of Shelf - Pens, Cleaning Supplies, Etc. |
| Powerforce Vacuum Cleaner, Swiffer and American Flag |
| Lot of Two Checkered Barstools |
| Miscellaneous Content - Shelves, Stickers, Etc. |
| P&R Custom Clock |
Please read and familiarize yourself with all of these terms and conditions, as you will be bidding strictly according to these terms and conditions (the terms and conditions may change from auction to auction).
**UPDATE
Dear Buyer,
As of 9/1/2021, Hostetter Auctioneers is implementing a new policy regarding removals.
If a request is made for Hostetter staff to transport items from the removal location back to our 7055 Big
Beaver Blvd. warehouse for pick up at a later date, there will NOW be a fee charged to your credit card
to retrieve your item(s). The fee is $20.00 per item, up to a maximum fee of $100.00 for 5 or more items.
Due to the excessive requests we’ve received to transport items, and the additional labor costs involved,
this new policy is necessary.
It is at the discretion of Hostetter Auctioneers to decide if we are available to transport items back to the
warehouse. Typically items larger than 2’x2’x2’ are not able to be transported. If your items are brought
to the warehouse, they must be picked up within 7 days of notification or the items are considered
abandoned.
Thank you,
Hostetter Auctioneers
ANY QUESTIONS - Call an auctioneer: Matt Hostetter: 724-462-5547
1)AUCTION SITE USER AGREEMENT - This is a legal agreement between you (the User or Buyer) and the Site Owner or Auction Company. You must be at least 18 years old to bid. Sherman Hostetter Group LLC DBA Hostetter Auctioneers (hereinafter referred to as Auction Company) at its sole discretion, may ban from further use any Buyer or Seller which Auction Company believes to have in any way misrepresented itself or any item, failed to abide by the terms and conditions, or conducted any improper auction behavior as determined solely by Auction Company. Any Seller who misrepresented their items and any Buyer who improperly fails to carry through with a purchase will be banned from any further use and may be subject to additional legal actions.
2)REGISTRATION - All Bidders are required to register for a bidder’s number to bid at our online auction. Bidders must register online providing the necessary registration information such as name, address, phone numbers, driver’s license, email address, credit card information and any other information requested for identification. The Bidder hereby acknowledges that he/she is of legal age and sound mind. By registering you are agreeing that you have read and fully understand the complete “Terms and Conditions of Auction”, and any additional terms and conditions announced or on the website, and agree to be bound thereby. All registered Bidders take full responsibility for their bidder’s number. Bidder numbers are nontransferable. All bids made by the holder of the number will be the responsibility of the registered Bidder. All sales are final. No refunds, reductions, returns, exchanges or charge backs! No Exceptions! The Auctioneers reserve the right to refuse any applicant for a bidding number or the privilege of bidding at any online or onsite auction and to revoke such privilege at any time.
3)ALL ITEMS SELL WITH RESERVE - All items in the online auction sell with reserve and subject to the Auction Company/Sellers acceptance and/or rejection of the high bid, regardless of whether stated “with reserve” or not stated “with reserve.”
4)BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The Auctioneers reserve the right to reject any and all bids on items and lots not being sold at absolute auction. The acceptable bidding increments are established and controlled by the Auctioneer. The Auctioneers reserve the right to bid on behalf of the Seller/s.
5)JUMP BID - is a bidding strategy by which a bidder increases the bid by more than the next accepted bid (such as placing your bid at $150 when the next accepted bid is $125). This practice is used by some bidders to discourage others from bidding in hopes of acquiring an item at a lower price. There are many theories on the effectiveness of this practice and a bidder who wishes to apply it does so at their own discretion. The auction company will not lower the price of an item that has been won by a "jump bid” with no other competing bids.
6)BUYERS PREMIUM - A 15% Buyers Premium Applies on ALL purchases. A 15% Buyers Premium will be added to all purchases. A Buyers Premium is a predetermined percentage or flat fee added to the high bid price to achieve the contract sales price. The use of a Buyers Premium will not in any manner whatsoever constitute an agency relationship between the Auctioneers (their licensees, employees or agents), and the Buyer. The Auctioneers, licensees, employees and agents are agents for the Seller Only. The Buyers Premium has been a choice of the Seller/s. The Buyers Premium may vary depending on the auction. The Auction Company may change the Buyers Premium at any time to meet the needs of the Seller and/or to abide by the auction listing agreement. You may also call our office to find out the exact amount of the Buyers Premium for any auction. Any applicable taxes are calculated on both the Buyers Premium and the bid amount.
7)POSTED CLOSING TIMES - Posted closing times and displays of the Auction Companies current time are approximate. Auction Company reserves the right to close early or extend an auction at any time at its sole discretion. It is strongly recommended that bids be placed early to avoid losing out due to an ill-timed, last minute bid or technical difficulty. All times are based on the Eastern Standard Time Zone unless stated otherwise.
8)PAYMENT - Payment will be by CREDIT CARD ONLY. The credit card used for your registration (must be your credit card) and will be charged for your purchases after the close of the auction and prior to the removal date. If you would like to update or change your card on file, please call us at 724-847-1887. The Auction Company RESERVES THE RIGHT to charge your credit card if no payment is made by the stated removal date. Payment by other than credit card (cash or check) must be coordinated with and approved by the Auction Company prior to bidding in the online auction. All payment methods must be approved by the Auctioneers in their sole and absolute discretion prior to bidding. No post dated checks will be accepted and will be treated as non-payment. Buyer payment will include bid amount, buyers premium, appropriate taxes and any other fees or expenses due. Buyers understand that items and lots sold on this website are used and therefore have some level of damage and are by the very nature of being “used and/or pre-owned” are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks. No purchases may be removed from the auction site until said purchases are paid for in full. Once it is removed it is your sole ownership and responsibility. Auctioneers reserve the right to have all payments converted to valid cash before removal of any items or lots.
9)PAYMENT RESPONSIBILITY - The Bidder hereby further agrees that whether he/she shall be acting as a principal, an agent, an officer or director of a corporation or partnership, or otherwise in any capacity whatsoever, the Bidder and the Company he/she represents shall both be responsible for the payment of the purchase price, Buyers Premium, applicable taxes and any other fees or expenses with respect to any and all items and lots for which the Bidder shall be the successful Buyer in the online auction. And, if the Buyer shall tender a credit card or non-certified check in payment for the whole or any part of such purchase price, Buyers Premium, applicable taxes and any other fees or expenses, all items and lots sold in reliance on such credit card and check shall be subject to seizure by Auctioneers and/or their licensees, employees and agents at the sole cost and expense of the Bidder in the event that such credit card or check shall be dishonored upon presentation of payment, for insufficient funds, stop payment, cancelled, charged back, etc. In the event of non-payment, dishonored, insufficient funds, stop payment, cancelled, charge back, etc., for credit card or check for purchases as stated herein, the Auctioneers shall have a possessory lien on said unpaid purchases until such purchases are paid in full. In the event of any lawsuit or legal action taken in connection with or arising out of the terms herein, the Auctioneers shall be entitled to recover all costs, expenses and attorney fees incurred.
10)LATE PAYMENT - Any payment accepted late shall incur a twenty-five percent (25%) surcharge on the full amount of the invoice.
11)PURCHASE PRICE CALCULATION - Note that the purchase price is the sum of the bid price, the Buyers Premium, any Buyers Fee, expenses, and sales tax if applicable, etc. All payments must be in US Funds. Auction Company reserves the right to charge the total amount or any remaining balance of your purchase price on your credit card if the balance is not otherwise paid. We do not accept partial payments. Invoices must be paid in full prior to pick up.
12)AUTO EXTEND FEATURE - Please note when bidding, there is an auto-extend feature on this online auction system. The auto-extend feature time frame is set by the auction company. For this example the auto-extend feature is set at 2 minutes - If someone bids in the last 2 minutes immediately prior to the end of the auction on that item, the online auction system will automatically extend the bidding time for a 2 minute increment (and will continue to do so) until there is a 2 minute period (after the original closing time) where no one bids, then the auction on that item will close. This feature will leave the bidding open for any item that has received a bid within the last 2 minutes prior to close and from the last recorded bid time, even if the ending time has been reached. This feature has been added to eliminate sniping and to make the online bidding process more fair and to resemble a 'live' auction. Keep in mind that seconds are not recorded with bid entries. A bid recorded at 5:30 and 40 seconds will have a recorded bid time of 5:30. Bid & refresh immediately and often.
13)REMOVAL AND FAILURE TO REMOVE - All purchases must be removed from the auction site without damaging any property and within the posted time frame allotted. Removal is at the Buyer’s sole obligation, cost and risk, and only in a manner approved by the Auctioneers. All costs, responsibility and risk of such removal shall be borne by Buyer and, in every case; Buyer will use prudence and care in such removal. In the event the Buyer fails to pay the whole of the purchase price, fails to remove all purchased items and lots, or comply with any other condition herein contained or agreed to, the deposit shall be forfeited to the Auctioneer and the Auctioneer shall retain a possessory lien on all items or lots of the Buyer. The auction deposit and any payment made by the Buyer shall be retained by the Auctioneers for application against such deficiency. The Buyer agrees that the Auctioneer and/or Seller may retain all monies received pursuant to any such resale and apply that money toward any deficiency without further notice. The Auctioneers reserve the right to require proof of adequate insurance coverage from any Buyer of items or lots requiring dismantling, rigging, hot cutting, refrigerant certification, or any situation deemed necessary by the Auctioneers. Buyers agree to indemnify and save harmless both the Sellers and the Auctioneers and their licensees, employees and agents, against any and all damage caused by the acts of the Buyers and/or their agents, employees, etcetera, in connection with the dismantling, rigging, hot cutting, refrigerant removal, or any situation during the removal process of any item/s or lot/s. Buyers agree that any and all damages to the land or buildings, inside and outside, caused by them must be fixed, replaced or repaired to Auctioneer’s and/or Seller’s satisfaction, before they are permitted to leave with their purchases. If for any reason, the Buyers fail to remove any item or lot within the specified time, the item or lot will be deemed abandoned and the Auctioneer shall have the right but not the obligation, at their sole discretion to resell, discard or remove and store the items or lots at the Buyers’ sole risk and expense, without any notice to Buyer and without waiving any rights that Auction Company or Seller may have against Buyer. The Buyers understand that they will lose any right, title or interest the Buyers may have acquired and the item or lot shall revert and repossess to the Seller or Auctioneer without any further notice to the Buyers. In addition, Buyers will be liable for any rent incurred, labor, storage, hauling, dump fees, etc, and damage suffered by the Auctioneers because of the Buyers failure to remove any item or lot. It is the Buyer’s responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items or lots purchased. Any fluids, spills, release into the environment, or any contamination whatsoever caused by the Buyer, their agents, employees, contractors, etc., during the auction or removal, are strictly and solely the Buyer’s expense and liability to correct, remove and clean up. The Buyer takes full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous materials, wastes or substances as defined in applicable Federal, State and Local Statues, Laws, Regulations, Rules or Ordinances. The Buyer hereby agrees to indemnify and hold harmless the Auctioneer and Seller from any and all damages, claims or liabilities from any and all injuries to persons or property of any type whatsoever caused by the Buyer, their agents, employees or contractors during the viewing and/or removal, as to the use or operation while inspecting the items or lots, and as to the use or operation surrounding the removal of purchased items or lots, and as to any environmental situations created by the Buyer. No purchases may be removed from the auction site until said purchases are paid for in full. Buyers will work in unison with other Buyers to ensure an orderly, safe removal process.
14)REMOVAL EXTENSION - On a case by case basis and at the Seller’s or Auctioneer’s discretion, the Seller or Auctioneer may grant a Buyer a removal extension with a non-refundable (per day) extension fee as set by the Seller or Auctioneer. Full payment of the extension fee must be made at least twenty-four (24) hours prior to the start of the extension.
15)NON-DELIVERY (BILL OF SALE – TRANSFER OF OWNERSHIP OR TITLE) - The Auctioneer and Seller shall in no event be liable to the Buyer for non-delivery (bill of sale – transfer of ownership or title) of any items or lots for any reason whatsoever except for the return to the Buyer of the deposit or other sums paid for such non-delivered items. This non-delivery period extends from the fall of the hammer until the time allotted for the removal process concludes. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents. Delivery in this section refers to the transfer of ownership and not the physical delivery of an item or lot to the Buyer or their address. Buyer understands that title transfers are between the Seller and the Buyer and are specifically not a responsibility or liability of the Auctioneer and or Auction Company.
16)NON-DELIVERY OF ITEM/S OR LOT/S - In the event any item/s or lot/s are not available for Buyer removal (for any reason), the Buyer will be reimbursed any monies paid on those item/s and/or lot/s only, and the balance of the purchases must be paid for in-full and removed in the proper time frame. The lack of delivery on any part of the Buyer’s purchase does not nullify the remainder of the purchase. Buyer will proceed in accordance with all terms and conditions posted herein, including any addendum/s and/or attachment/s made to these terms and conditions. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents including charge backs, stop payment, cancellation, etc. Delivery in this section refers to the transfer of ownership and the physical delivery of an item or lot to the Buyer.
17)ADDITIONS OR WITHDRAWALS - The Auctioneers reserve the right before, during and/or after the auction, to withdraw from the auction any of the items or lots listed or to sell at this auction items or lots not previously listed. Auctioneers also reserve the right to group and regroup items and lots, or separate items and lots, or parts of a lot as deemed necessary by the Auctioneers. The Auctioneers reserve the right to sell all of the items and lots listed in bulk or to sell any and all items or lots prior to the auction. All items and lots are subject to prior sale, cancellation and sold “with reserve.” Auctioneer and Seller reserve the right to augment the auction with items from additional Sellers. These items and lots may be interspersed and not specifically identified throughout the auction.
18)SALES TAX (if applicable) - All applicable sales tax, according to the governing tax laws in the state where the auction is being held, will be added to the purchase price on all taxable items or lots unless the Buyer files a properly completed tax exempt form with our auction office prior to the auction. All bidders will be subject to the sales tax unless you provide our office with the documentation we require for exemption including (all out-of-state Buyers and out-of-country Buyers must pay sales tax on all items including titled items), unless stated otherwise in the auction terms. There is no elimination of or credit back of taxes once the auction closes and settles. The sales tax is calculated on the total purchase price including the buyer’s premium and any applicable fees and/or expenses.
19)TITLES - Title and Vehicle transfers will be delivered to the Buyer upon full payment and within legal guidelines. A mutually agreeable time and location will be set by Sellers and Buyers to complete notary work at a licensed Notary and the Buyer will pay the applicable taxes and fees. The Buyer and Seller understand that the Auctioneer and Auction Company are not notaries nor involved in the transfer process. No responsibility or liability is assumed by the Auctioneers and Auction Company for the transfer. Titles will be transferred within 30 days of the close of the auction unless an extension is warranted.
20)VIEWING - The Buyers are afforded a time specific stated opportunity (or viewing by appointment) to inspect the items and lots prior to final close of the online bidding for the auction. The Buyers are relying solely on their investigations and inspections, and not any representations made by the Sellers, Auctioneers, their licensees, employees and agents or descriptions posted online. The Buyers hereby waive any and all further inspections. The Buyers fully agree and understand that they are purchasing each and every item and lot in an “As-Is”-“Where-Is” condition, with all its goodness and faults. The Sellers, Auctioneers, their licensees, employees and agents, make no representations, guarantees or warranties of any kind, either expressed or implied, statutory or otherwise of any nature whatsoever.
21)PERSONAL AND PROPERTY RISK - Persons attending during viewing and/or removal of items and lots, assume all risks of damage of or loss to person and property and specifically assume all risks by reason of any defect in or condition of the premises on which the viewing and/or removal is held. Auctioneers, licensees, employees, agents and/or Sellers are not responsible for accidents or theft, personal or physical, on the premises or in coming or going, to and from the viewing and/or removal. All persons in attendance during viewing and/or removal shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by the Auctioneers, and federal, state and local regulations. Buyer specifically releases Auctioneers, licensees, employees and agents from any and all liability thereof.
22)AS IS – WHERE IS – (Attend the Preview!) All items and lots are sold on an “AS-IS”, “WHERE IS” and “WITH ALL FAULTS” basis “WITHOUT EXCEPTION” with no warranty of any type expressed or implied as to the merchantability or fitness for any particular purpose of any goods offered in this sale. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” are at some level of defective. Buyers agree to not “stop payment,” “cancel” or “charge back,” etc., any credit cards, debit cards and/or checks. The Auctioneer and Seller expressly and specifically disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. Removal is at the Buyer’s sole obligation, risk and expense. No sale will be invalidated by reason of any defect or inaccuracy in any of the items or lots by reason of their being incorrectly described orally or written, invoiced or cataloged, and no liability will be borne by the Auctioneers, licensees, employees and agents in respect to any such faults or errors. All marketing and information has been prepared only as a guide and is not offered as completely accurate, nor does it give the Buyers all of the information on the item or lot. Except as herein contained, there shall be no guarantees or warranties, expressed or implied, statutory or otherwise of any nature whatsoever. The Buyers will accept the items or lots in spite of any defects or conditions, known or unknown, visible or not visible, and therefore Buyers do by these presents remise, release, acquit, quit claim and forever discharge the Sellers, Auctioneers, licensees, employees and agents from any and all claims now and in the future. The Buyers should avail themselves the opportunity to inspect all items and lots during the inspection period. Again all Buyers are strongly urged to physically inspect the item during the inspection period. All sales are final. No bids can be withdrawn during or after the auction for any reason. Buyer understands that these terms as well as all other terms and conditions can only be amended or revised in writing and signed by the Auctioneer. Buyer also agrees that any oral, written or electronic representation made by the Auctioneer shall not modify these 'AS IS - WHERE IS' terms. Buyer understands that any description given in the catalog or written on the equipment is not guaranteed, and Buyer will rely entirely on their own inspection and/or investigations. All information and descriptions contained in advertising this sale are believed correct, but no responsibility is assumed by Auction Company or Seller for any errors or omissions.
23)DISPUTES - In the event that you have a dispute with one or more users, you release Auctioneers/Provider (and our officers, directors, licensees, agents, subsidiaries, employees, and parent companies) from claims, demands and damages (actual and consequential) of every kind and nature, known and unknown, arising out of or in any way connected with such disputes. If any dispute arises as to any bidding between two or more Bidders, or as to the Seller, or as to an item or lot, etcetera, the Auctioneers at their sole discretion, may immediately put the disputed item or lot online again for auction or declare the Buyer by decision. The actions and decisions of the Auctioneer shall be binding, final and absolute. Should a dispute arise after the auction, the Auctioneers sales/electronic record will be deemed as final and absolute. In no instance will a dispute be recognized once the item or lot has been removed from the premises.
24)CLAIMS - No claims or returns will be allowed after the items or lots have been removed from the premises. No claim will be allowed for adjustments or rescission of any sales based upon the failure of the item or lot to correspond with any standard and/or expectation of the Buyer. Buyer agrees to not charge back, cancel, stop payment, etc., any credit cards, debit cards and/or checks.
25)POOLING - Pooling or bid rigging is fraud and a serious Federal Offense. The Auctioneers reserve the right to pull the item/s or lot/s from the auction or void any sale at auction or bid on behalf of the Seller/s, when the Auctioneers detect or suspect pooling by two or more Bidders. Pooling will be prosecuted to the fullest extent of the law.
26)ITEM/LOT RESPONSIBILITY - Items and lots become the complete and sole responsibility of the Buyers for the care, custody and protection immediately upon the online auction system closing the bidding or in a customary manner changes ownership. It shall be the responsibility of the Buyers to insure their purchases immediately. The Auctioneers, licensees, employees and agents assume no responsibility for any missing or damaged items or lots and are specifically not acting as the Buyer’s security agent or a police officer.
27)THEFT - Theft is a serious concern to all of us, if discovered, the individuals involved will be prosecuted to the fullest extent of the law. The Auctioneer reserves the right to inspect all vehicles, tool boxes, etc. Instances of theft will result in immediate termination of future bidding and current removal privileges and prosecution.
28) FORUM SELCTION AND APPLICABLE LAW - The parties agree that any litigation or dispute concerning enforcement of this contract or arising out of this online auction shall be brought in the State of Pennsylvania, the jurisdiction shall be in the County of Beaver and that Pennsylvania law shall govern, irrespective of the location, county or state where the auction was held. The prevailing party shall be entitled to an award of court costs and attorney fees incurred.
29)INFORMATION - This site and the information, content, and materials on this site are provided on an “AS IS” “Where Is,” and “Where Available” basis. Auctioneer/Provider makes no representations or warranties of any kind, express or implied, as to the operation of the site, the content, information, or the materials on this site. To the fullest extent permissible under applicable law, provider expressly disclaims all warranties, expressed or implied of any kind, with respect to any of the materials, content, or information on this site or any goods or other products or services offered, sold, or displayed on this site or your use of this site generally, including warranties of merchantability, accuracy of information, quality, title, fitness for a particular purpose, and non-infringement. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks.
30) INFORMATION DESCREPENCIES - While quantities and descriptions are believed to be correct, there are no warranties or guarantees, expressed or implied, and the Auctioneers, licensees, employees and agents will not be held responsible for advertising discrepancies, inaccuracies or failure of the merchandise to correspond with any standard and/or expectation. No item or lot shall be sold or deemed to be sold by description. A Buyer shall not be entitled to rely on any representations made either in writing or orally, by or on behalf of, the Sellers, Auctioneers, licensees, employees and agents. The description, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars set out in the newspaper ads, auction brochures, catalogs, and/or invoices are believed to be accurate, but such information is given by way of identification only and no warranty, condition or guarantee is given or is to be implied as to the accuracy of such descriptions, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars, or the genuineness or authenticity of any item or lot, and neither Sellers nor Auctioneers, licensees, employees and agents, will be responsible for any damage or loss, consequential or otherwise, arising as a result of any inaccuracy in respect thereof. Announcements and postings shall take precedence over any advertising or pre-auction material, written, oral and/or electronic. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “cancel” or “charge back” any credit cards, debit cards and/or checks.
32)DISCLAIMER OF WARRANTY AND RELEASE - You expressly agree that the use of this Website is at your sole risk, responsibility and obligation. Neither the Auction Company, its affiliates, nor any of their officers, directors, licensees, employees, agents, third-party content providers, or licensors (collectively, “Providers”), or the like, warrant that this Site will be uninterrupted, error-free or virus-free; nor do they make any warranty as to the results that may be obtained from the use of this site, or as to the accuracy, completeness, reliability, security, or currency of the Site.
33)ERRORS, OMMISSIONS, ETC - The Site may contain errors, omissions, inaccuracies, or outdated information. Further, Auctioneer/Provider does not warrant reliability of any statement or other information displayed or distributed through the Site. Auctioneer/Provider reserves the right, in its sole discretion, to correct any errors or omissions in any portion of the Site. Auctioneer/Provider may make any other changes to this Site at any time without notice. Auctioneer/Provider makes reasonable commercial efforts to make the Site available at all times, however, Auctioneer/Provider is not responsible for any service interruptions, including, but not limited to, interruptions that may affect aspects of the sale of equipment and/or virus’s.
34)INDEMNITY CLAUSE - Buyer/s agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner arising from this auction or privately negotiated sale; including costs, expenses, or compensation whatsoever, direct or indirect, known or unknown, foreseen or unforeseen, which the Bidder now has or which may arise in the future on the account of or in any way growing out of or connected with any defects, latent or otherwise, or the physical condition of any items or lots purchased or any law or regulation applicable thereto. The indemnity clause applies to the auction and/or a privately negotiated sale, before, during and after, the auction or the privately negotiated sale, and shall survive settlement or lack thereof. Auctioneers are not responsible for accidents. Buyers must insure their own liabilities, interests, etcetera in all real estate and/or personal property. The Buyer/s also agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner, etcetera, pertaining to hazardous materials, substances, sites and/or conditions, (known or unknown), and are strictly and solely the Seller’s ownership, responsibility and liability.
35)LIMITATION OF LIABILITIES - You agree that the Auctioneer/Provider and its providers shall not be liable for any damage, loss, or expense of any kind arising out of or resulting from your possession or use of the materials, content, or information on this site (Auctioneers or Provider) or from your purchase or sale of goods through this site regardless of whether such liability is based in tort, contract, or otherwise. In no event, including without limitation, a negligent act, shall Auctioneer/Provider or any of its providers be liable to you for any direct, indirect, special, incidental, consequential, or punitive damages (including, without limitation, loss of profits, loss or corruption of data, loss of goodwill, work stoppage, computer failure or malfunction, or interruption of business, virus’s, etc.), arising out of or in any way related to the materials, content, or information on this site or any other products, services, or information offered, sold, or displayed on this site, your use of, or inability to use this site generally, or otherwise in connection with this agreement, regardless of whether Auctioneer/Provider or any of its providers have been advised of the possibility of such damages.
36)RECORDS - The records (written, audio, video, digital, computer generated and etc.) of the auction kept by the Auctioneers, Providers, bookkeepers and employees will be taken as final in the event of any disputes or claims.
37)AGENCY - The Auctioneers, licensees, employees and agents are acting as an agent for the “Seller Only” and are not responsible for acts of its principals, nor liability for damages, accidents or theft.
38)BINDING - It is agreed that the Bidder shall be bound by these terms and conditions, and if there is more than one bidder, the obligations imposed by these terms and conditions, shall be joint and several. If any term or condition is determined by a court to be unenforceable, the remainder of the terms and conditions shall not be affected. All terms and conditions shall survive settlement or lack thereof.
39)ABSENTEE BIDS & PROCEDURE - All absentee bids are handled by the online auction system of bidding. Buyer understands that all terms and conditions posted herein including addendums and attachments, apply to absentee bids as well. Because of the random nature of the auction bidding process, it is possible for the high bid to be by another Bidder, at the same amount that was left by the Absentee Bidder, therefore, it is agreed by the Absentee Bidder that neither the Sellers, Auctioneers, licensees, employees nor representatives, including the online auction service provider assume any liability or responsibility of any kind whatsoever for failure to execute bids for or on behalf of the Absentee Bidder for any reason whatsoever.
40)CREDIT CARD DISCLAIMER - Registrant/Bidder/Buyer understands that the Auction Company assumes no liability for security of credit card numbers on Auctioneers site, emails, etc., including the auction system Provider’s site.
Thank you for Thinking Auction and Choosing Hostetter Auctioneers!
Sherman Hostetter Group LLC
Hostetter Auctioneers
7055 Big Beaver Blvd.
Beaver Falls, PA 15010
Office: 724-847-1887
Email: [email protected]
Website: www.HostetterAuctioneers.com
**UPDATE
Dear Buyer,
As of 9/1/2021, Hostetter Auctioneers is implementing a new policy regarding removals.
If a request is made for Hostetter staff to transport items from the removal location back to our 7055 Big
Beaver Blvd. warehouse for pick up at a later date, there will NOW be a fee charged to your credit card
to retrieve your item(s). The fee is $20.00 per item, up to a maximum fee of $100.00 for 5 or more items.
Due to the excessive requests we’ve received to transport items, and the additional labor costs involved,
this new policy is necessary.
It is at the discretion of Hostetter Auctioneers to decide if we are available to transport items back to the
warehouse. Typically items larger than 2’x2’x2’ are not able to be transported. If your items are brought
to the warehouse, they must be picked up within 7 days of notification or the items are considered
abandoned.
Thank you,
Hostetter Auctioneers
ANY QUESTIONS - Call an auctioneer: Matt Hostetter: 724-462-5547
1)AUCTION SITE USER AGREEMENT - This is a legal agreement between you (the User or Buyer) and the Site Owner or Auction Company. You must be at least 18 years old to bid. Sherman Hostetter Group LLC DBA Hostetter Auctioneers (hereinafter referred to as Auction Company) at its sole discretion, may ban from further use any Buyer or Seller which Auction Company believes to have in any way misrepresented itself or any item, failed to abide by the terms and conditions, or conducted any improper auction behavior as determined solely by Auction Company. Any Seller who misrepresented their items and any Buyer who improperly fails to carry through with a purchase will be banned from any further use and may be subject to additional legal actions.
2)REGISTRATION - All Bidders are required to register for a bidder’s number to bid at our online auction. Bidders must register online providing the necessary registration information such as name, address, phone numbers, driver’s license, email address, credit card information and any other information requested for identification. The Bidder hereby acknowledges that he/she is of legal age and sound mind. By registering you are agreeing that you have read and fully understand the complete “Terms and Conditions of Auction”, and any additional terms and conditions announced or on the website, and agree to be bound thereby. All registered Bidders take full responsibility for their bidder’s number. Bidder numbers are nontransferable. All bids made by the holder of the number will be the responsibility of the registered Bidder. All sales are final. No refunds, reductions, returns, exchanges or charge backs! No Exceptions! The Auctioneers reserve the right to refuse any applicant for a bidding number or the privilege of bidding at any online or onsite auction and to revoke such privilege at any time.
3)ALL ITEMS SELL WITH RESERVE - All items in the online auction sell with reserve and subject to the Auction Company/Sellers acceptance and/or rejection of the high bid, regardless of whether stated “with reserve” or not stated “with reserve.”
4)BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The Auctioneers reserve the right to reject any and all bids on items and lots not being sold at absolute auction. The acceptable bidding increments are established and controlled by the Auctioneer. The Auctioneers reserve the right to bid on behalf of the Seller/s.
5)JUMP BID - is a bidding strategy by which a bidder increases the bid by more than the next accepted bid (such as placing your bid at $150 when the next accepted bid is $125). This practice is used by some bidders to discourage others from bidding in hopes of acquiring an item at a lower price. There are many theories on the effectiveness of this practice and a bidder who wishes to apply it does so at their own discretion. The auction company will not lower the price of an item that has been won by a "jump bid” with no other competing bids.
6)BUYERS PREMIUM - A 15% Buyers Premium Applies on ALL purchases. A 15% Buyers Premium will be added to all purchases. A Buyers Premium is a predetermined percentage or flat fee added to the high bid price to achieve the contract sales price. The use of a Buyers Premium will not in any manner whatsoever constitute an agency relationship between the Auctioneers (their licensees, employees or agents), and the Buyer. The Auctioneers, licensees, employees and agents are agents for the Seller Only. The Buyers Premium has been a choice of the Seller/s. The Buyers Premium may vary depending on the auction. The Auction Company may change the Buyers Premium at any time to meet the needs of the Seller and/or to abide by the auction listing agreement. You may also call our office to find out the exact amount of the Buyers Premium for any auction. Any applicable taxes are calculated on both the Buyers Premium and the bid amount.
7)POSTED CLOSING TIMES - Posted closing times and displays of the Auction Companies current time are approximate. Auction Company reserves the right to close early or extend an auction at any time at its sole discretion. It is strongly recommended that bids be placed early to avoid losing out due to an ill-timed, last minute bid or technical difficulty. All times are based on the Eastern Standard Time Zone unless stated otherwise.
8)PAYMENT - Payment will be by CREDIT CARD ONLY. The credit card used for your registration (must be your credit card) and will be charged for your purchases after the close of the auction and prior to the removal date. If you would like to update or change your card on file, please call us at 724-847-1887. The Auction Company RESERVES THE RIGHT to charge your credit card if no payment is made by the stated removal date. Payment by other than credit card (cash or check) must be coordinated with and approved by the Auction Company prior to bidding in the online auction. All payment methods must be approved by the Auctioneers in their sole and absolute discretion prior to bidding. No post dated checks will be accepted and will be treated as non-payment. Buyer payment will include bid amount, buyers premium, appropriate taxes and any other fees or expenses due. Buyers understand that items and lots sold on this website are used and therefore have some level of damage and are by the very nature of being “used and/or pre-owned” are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks. No purchases may be removed from the auction site until said purchases are paid for in full. Once it is removed it is your sole ownership and responsibility. Auctioneers reserve the right to have all payments converted to valid cash before removal of any items or lots.
9)PAYMENT RESPONSIBILITY - The Bidder hereby further agrees that whether he/she shall be acting as a principal, an agent, an officer or director of a corporation or partnership, or otherwise in any capacity whatsoever, the Bidder and the Company he/she represents shall both be responsible for the payment of the purchase price, Buyers Premium, applicable taxes and any other fees or expenses with respect to any and all items and lots for which the Bidder shall be the successful Buyer in the online auction. And, if the Buyer shall tender a credit card or non-certified check in payment for the whole or any part of such purchase price, Buyers Premium, applicable taxes and any other fees or expenses, all items and lots sold in reliance on such credit card and check shall be subject to seizure by Auctioneers and/or their licensees, employees and agents at the sole cost and expense of the Bidder in the event that such credit card or check shall be dishonored upon presentation of payment, for insufficient funds, stop payment, cancelled, charged back, etc. In the event of non-payment, dishonored, insufficient funds, stop payment, cancelled, charge back, etc., for credit card or check for purchases as stated herein, the Auctioneers shall have a possessory lien on said unpaid purchases until such purchases are paid in full. In the event of any lawsuit or legal action taken in connection with or arising out of the terms herein, the Auctioneers shall be entitled to recover all costs, expenses and attorney fees incurred.
10)LATE PAYMENT - Any payment accepted late shall incur a twenty-five percent (25%) surcharge on the full amount of the invoice.
11)PURCHASE PRICE CALCULATION - Note that the purchase price is the sum of the bid price, the Buyers Premium, any Buyers Fee, expenses, and sales tax if applicable, etc. All payments must be in US Funds. Auction Company reserves the right to charge the total amount or any remaining balance of your purchase price on your credit card if the balance is not otherwise paid. We do not accept partial payments. Invoices must be paid in full prior to pick up.
12)AUTO EXTEND FEATURE - Please note when bidding, there is an auto-extend feature on this online auction system. The auto-extend feature time frame is set by the auction company. For this example the auto-extend feature is set at 2 minutes - If someone bids in the last 2 minutes immediately prior to the end of the auction on that item, the online auction system will automatically extend the bidding time for a 2 minute increment (and will continue to do so) until there is a 2 minute period (after the original closing time) where no one bids, then the auction on that item will close. This feature will leave the bidding open for any item that has received a bid within the last 2 minutes prior to close and from the last recorded bid time, even if the ending time has been reached. This feature has been added to eliminate sniping and to make the online bidding process more fair and to resemble a 'live' auction. Keep in mind that seconds are not recorded with bid entries. A bid recorded at 5:30 and 40 seconds will have a recorded bid time of 5:30. Bid & refresh immediately and often.
13)REMOVAL AND FAILURE TO REMOVE - All purchases must be removed from the auction site without damaging any property and within the posted time frame allotted. Removal is at the Buyer’s sole obligation, cost and risk, and only in a manner approved by the Auctioneers. All costs, responsibility and risk of such removal shall be borne by Buyer and, in every case; Buyer will use prudence and care in such removal. In the event the Buyer fails to pay the whole of the purchase price, fails to remove all purchased items and lots, or comply with any other condition herein contained or agreed to, the deposit shall be forfeited to the Auctioneer and the Auctioneer shall retain a possessory lien on all items or lots of the Buyer. The auction deposit and any payment made by the Buyer shall be retained by the Auctioneers for application against such deficiency. The Buyer agrees that the Auctioneer and/or Seller may retain all monies received pursuant to any such resale and apply that money toward any deficiency without further notice. The Auctioneers reserve the right to require proof of adequate insurance coverage from any Buyer of items or lots requiring dismantling, rigging, hot cutting, refrigerant certification, or any situation deemed necessary by the Auctioneers. Buyers agree to indemnify and save harmless both the Sellers and the Auctioneers and their licensees, employees and agents, against any and all damage caused by the acts of the Buyers and/or their agents, employees, etcetera, in connection with the dismantling, rigging, hot cutting, refrigerant removal, or any situation during the removal process of any item/s or lot/s. Buyers agree that any and all damages to the land or buildings, inside and outside, caused by them must be fixed, replaced or repaired to Auctioneer’s and/or Seller’s satisfaction, before they are permitted to leave with their purchases. If for any reason, the Buyers fail to remove any item or lot within the specified time, the item or lot will be deemed abandoned and the Auctioneer shall have the right but not the obligation, at their sole discretion to resell, discard or remove and store the items or lots at the Buyers’ sole risk and expense, without any notice to Buyer and without waiving any rights that Auction Company or Seller may have against Buyer. The Buyers understand that they will lose any right, title or interest the Buyers may have acquired and the item or lot shall revert and repossess to the Seller or Auctioneer without any further notice to the Buyers. In addition, Buyers will be liable for any rent incurred, labor, storage, hauling, dump fees, etc, and damage suffered by the Auctioneers because of the Buyers failure to remove any item or lot. It is the Buyer’s responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items or lots purchased. Any fluids, spills, release into the environment, or any contamination whatsoever caused by the Buyer, their agents, employees, contractors, etc., during the auction or removal, are strictly and solely the Buyer’s expense and liability to correct, remove and clean up. The Buyer takes full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous materials, wastes or substances as defined in applicable Federal, State and Local Statues, Laws, Regulations, Rules or Ordinances. The Buyer hereby agrees to indemnify and hold harmless the Auctioneer and Seller from any and all damages, claims or liabilities from any and all injuries to persons or property of any type whatsoever caused by the Buyer, their agents, employees or contractors during the viewing and/or removal, as to the use or operation while inspecting the items or lots, and as to the use or operation surrounding the removal of purchased items or lots, and as to any environmental situations created by the Buyer. No purchases may be removed from the auction site until said purchases are paid for in full. Buyers will work in unison with other Buyers to ensure an orderly, safe removal process.
14)REMOVAL EXTENSION - On a case by case basis and at the Seller’s or Auctioneer’s discretion, the Seller or Auctioneer may grant a Buyer a removal extension with a non-refundable (per day) extension fee as set by the Seller or Auctioneer. Full payment of the extension fee must be made at least twenty-four (24) hours prior to the start of the extension.
15)NON-DELIVERY (BILL OF SALE – TRANSFER OF OWNERSHIP OR TITLE) - The Auctioneer and Seller shall in no event be liable to the Buyer for non-delivery (bill of sale – transfer of ownership or title) of any items or lots for any reason whatsoever except for the return to the Buyer of the deposit or other sums paid for such non-delivered items. This non-delivery period extends from the fall of the hammer until the time allotted for the removal process concludes. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents. Delivery in this section refers to the transfer of ownership and not the physical delivery of an item or lot to the Buyer or their address. Buyer understands that title transfers are between the Seller and the Buyer and are specifically not a responsibility or liability of the Auctioneer and or Auction Company.
16)NON-DELIVERY OF ITEM/S OR LOT/S - In the event any item/s or lot/s are not available for Buyer removal (for any reason), the Buyer will be reimbursed any monies paid on those item/s and/or lot/s only, and the balance of the purchases must be paid for in-full and removed in the proper time frame. The lack of delivery on any part of the Buyer’s purchase does not nullify the remainder of the purchase. Buyer will proceed in accordance with all terms and conditions posted herein, including any addendum/s and/or attachment/s made to these terms and conditions. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents including charge backs, stop payment, cancellation, etc. Delivery in this section refers to the transfer of ownership and the physical delivery of an item or lot to the Buyer.
17)ADDITIONS OR WITHDRAWALS - The Auctioneers reserve the right before, during and/or after the auction, to withdraw from the auction any of the items or lots listed or to sell at this auction items or lots not previously listed. Auctioneers also reserve the right to group and regroup items and lots, or separate items and lots, or parts of a lot as deemed necessary by the Auctioneers. The Auctioneers reserve the right to sell all of the items and lots listed in bulk or to sell any and all items or lots prior to the auction. All items and lots are subject to prior sale, cancellation and sold “with reserve.” Auctioneer and Seller reserve the right to augment the auction with items from additional Sellers. These items and lots may be interspersed and not specifically identified throughout the auction.
18)SALES TAX (if applicable) - All applicable sales tax, according to the governing tax laws in the state where the auction is being held, will be added to the purchase price on all taxable items or lots unless the Buyer files a properly completed tax exempt form with our auction office prior to the auction. All bidders will be subject to the sales tax unless you provide our office with the documentation we require for exemption including (all out-of-state Buyers and out-of-country Buyers must pay sales tax on all items including titled items), unless stated otherwise in the auction terms. There is no elimination of or credit back of taxes once the auction closes and settles. The sales tax is calculated on the total purchase price including the buyer’s premium and any applicable fees and/or expenses.
19)TITLES - Title and Vehicle transfers will be delivered to the Buyer upon full payment and within legal guidelines. A mutually agreeable time and location will be set by Sellers and Buyers to complete notary work at a licensed Notary and the Buyer will pay the applicable taxes and fees. The Buyer and Seller understand that the Auctioneer and Auction Company are not notaries nor involved in the transfer process. No responsibility or liability is assumed by the Auctioneers and Auction Company for the transfer. Titles will be transferred within 30 days of the close of the auction unless an extension is warranted.
20)VIEWING - The Buyers are afforded a time specific stated opportunity (or viewing by appointment) to inspect the items and lots prior to final close of the online bidding for the auction. The Buyers are relying solely on their investigations and inspections, and not any representations made by the Sellers, Auctioneers, their licensees, employees and agents or descriptions posted online. The Buyers hereby waive any and all further inspections. The Buyers fully agree and understand that they are purchasing each and every item and lot in an “As-Is”-“Where-Is” condition, with all its goodness and faults. The Sellers, Auctioneers, their licensees, employees and agents, make no representations, guarantees or warranties of any kind, either expressed or implied, statutory or otherwise of any nature whatsoever.
21)PERSONAL AND PROPERTY RISK - Persons attending during viewing and/or removal of items and lots, assume all risks of damage of or loss to person and property and specifically assume all risks by reason of any defect in or condition of the premises on which the viewing and/or removal is held. Auctioneers, licensees, employees, agents and/or Sellers are not responsible for accidents or theft, personal or physical, on the premises or in coming or going, to and from the viewing and/or removal. All persons in attendance during viewing and/or removal shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by the Auctioneers, and federal, state and local regulations. Buyer specifically releases Auctioneers, licensees, employees and agents from any and all liability thereof.
22)AS IS – WHERE IS – (Attend the Preview!) All items and lots are sold on an “AS-IS”, “WHERE IS” and “WITH ALL FAULTS” basis “WITHOUT EXCEPTION” with no warranty of any type expressed or implied as to the merchantability or fitness for any particular purpose of any goods offered in this sale. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” are at some level of defective. Buyers agree to not “stop payment,” “cancel” or “charge back,” etc., any credit cards, debit cards and/or checks. The Auctioneer and Seller expressly and specifically disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. Removal is at the Buyer’s sole obligation, risk and expense. No sale will be invalidated by reason of any defect or inaccuracy in any of the items or lots by reason of their being incorrectly described orally or written, invoiced or cataloged, and no liability will be borne by the Auctioneers, licensees, employees and agents in respect to any such faults or errors. All marketing and information has been prepared only as a guide and is not offered as completely accurate, nor does it give the Buyers all of the information on the item or lot. Except as herein contained, there shall be no guarantees or warranties, expressed or implied, statutory or otherwise of any nature whatsoever. The Buyers will accept the items or lots in spite of any defects or conditions, known or unknown, visible or not visible, and therefore Buyers do by these presents remise, release, acquit, quit claim and forever discharge the Sellers, Auctioneers, licensees, employees and agents from any and all claims now and in the future. The Buyers should avail themselves the opportunity to inspect all items and lots during the inspection period. Again all Buyers are strongly urged to physically inspect the item during the inspection period. All sales are final. No bids can be withdrawn during or after the auction for any reason. Buyer understands that these terms as well as all other terms and conditions can only be amended or revised in writing and signed by the Auctioneer. Buyer also agrees that any oral, written or electronic representation made by the Auctioneer shall not modify these 'AS IS - WHERE IS' terms. Buyer understands that any description given in the catalog or written on the equipment is not guaranteed, and Buyer will rely entirely on their own inspection and/or investigations. All information and descriptions contained in advertising this sale are believed correct, but no responsibility is assumed by Auction Company or Seller for any errors or omissions.
23)DISPUTES - In the event that you have a dispute with one or more users, you release Auctioneers/Provider (and our officers, directors, licensees, agents, subsidiaries, employees, and parent companies) from claims, demands and damages (actual and consequential) of every kind and nature, known and unknown, arising out of or in any way connected with such disputes. If any dispute arises as to any bidding between two or more Bidders, or as to the Seller, or as to an item or lot, etcetera, the Auctioneers at their sole discretion, may immediately put the disputed item or lot online again for auction or declare the Buyer by decision. The actions and decisions of the Auctioneer shall be binding, final and absolute. Should a dispute arise after the auction, the Auctioneers sales/electronic record will be deemed as final and absolute. In no instance will a dispute be recognized once the item or lot has been removed from the premises.
24)CLAIMS - No claims or returns will be allowed after the items or lots have been removed from the premises. No claim will be allowed for adjustments or rescission of any sales based upon the failure of the item or lot to correspond with any standard and/or expectation of the Buyer. Buyer agrees to not charge back, cancel, stop payment, etc., any credit cards, debit cards and/or checks.
25)POOLING - Pooling or bid rigging is fraud and a serious Federal Offense. The Auctioneers reserve the right to pull the item/s or lot/s from the auction or void any sale at auction or bid on behalf of the Seller/s, when the Auctioneers detect or suspect pooling by two or more Bidders. Pooling will be prosecuted to the fullest extent of the law.
26)ITEM/LOT RESPONSIBILITY - Items and lots become the complete and sole responsibility of the Buyers for the care, custody and protection immediately upon the online auction system closing the bidding or in a customary manner changes ownership. It shall be the responsibility of the Buyers to insure their purchases immediately. The Auctioneers, licensees, employees and agents assume no responsibility for any missing or damaged items or lots and are specifically not acting as the Buyer’s security agent or a police officer.
27)THEFT - Theft is a serious concern to all of us, if discovered, the individuals involved will be prosecuted to the fullest extent of the law. The Auctioneer reserves the right to inspect all vehicles, tool boxes, etc. Instances of theft will result in immediate termination of future bidding and current removal privileges and prosecution.
28) FORUM SELCTION AND APPLICABLE LAW - The parties agree that any litigation or dispute concerning enforcement of this contract or arising out of this online auction shall be brought in the State of Pennsylvania, the jurisdiction shall be in the County of Beaver and that Pennsylvania law shall govern, irrespective of the location, county or state where the auction was held. The prevailing party shall be entitled to an award of court costs and attorney fees incurred.
29)INFORMATION - This site and the information, content, and materials on this site are provided on an “AS IS” “Where Is,” and “Where Available” basis. Auctioneer/Provider makes no representations or warranties of any kind, express or implied, as to the operation of the site, the content, information, or the materials on this site. To the fullest extent permissible under applicable law, provider expressly disclaims all warranties, expressed or implied of any kind, with respect to any of the materials, content, or information on this site or any goods or other products or services offered, sold, or displayed on this site or your use of this site generally, including warranties of merchantability, accuracy of information, quality, title, fitness for a particular purpose, and non-infringement. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks.
30) INFORMATION DESCREPENCIES - While quantities and descriptions are believed to be correct, there are no warranties or guarantees, expressed or implied, and the Auctioneers, licensees, employees and agents will not be held responsible for advertising discrepancies, inaccuracies or failure of the merchandise to correspond with any standard and/or expectation. No item or lot shall be sold or deemed to be sold by description. A Buyer shall not be entitled to rely on any representations made either in writing or orally, by or on behalf of, the Sellers, Auctioneers, licensees, employees and agents. The description, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars set out in the newspaper ads, auction brochures, catalogs, and/or invoices are believed to be accurate, but such information is given by way of identification only and no warranty, condition or guarantee is given or is to be implied as to the accuracy of such descriptions, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars, or the genuineness or authenticity of any item or lot, and neither Sellers nor Auctioneers, licensees, employees and agents, will be responsible for any damage or loss, consequential or otherwise, arising as a result of any inaccuracy in respect thereof. Announcements and postings shall take precedence over any advertising or pre-auction material, written, oral and/or electronic. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “cancel” or “charge back” any credit cards, debit cards and/or checks.
32)DISCLAIMER OF WARRANTY AND RELEASE - You expressly agree that the use of this Website is at your sole risk, responsibility and obligation. Neither the Auction Company, its affiliates, nor any of their officers, directors, licensees, employees, agents, third-party content providers, or licensors (collectively, “Providers”), or the like, warrant that this Site will be uninterrupted, error-free or virus-free; nor do they make any warranty as to the results that may be obtained from the use of this site, or as to the accuracy, completeness, reliability, security, or currency of the Site.
33)ERRORS, OMMISSIONS, ETC - The Site may contain errors, omissions, inaccuracies, or outdated information. Further, Auctioneer/Provider does not warrant reliability of any statement or other information displayed or distributed through the Site. Auctioneer/Provider reserves the right, in its sole discretion, to correct any errors or omissions in any portion of the Site. Auctioneer/Provider may make any other changes to this Site at any time without notice. Auctioneer/Provider makes reasonable commercial efforts to make the Site available at all times, however, Auctioneer/Provider is not responsible for any service interruptions, including, but not limited to, interruptions that may affect aspects of the sale of equipment and/or virus’s.
34)INDEMNITY CLAUSE - Buyer/s agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner arising from this auction or privately negotiated sale; including costs, expenses, or compensation whatsoever, direct or indirect, known or unknown, foreseen or unforeseen, which the Bidder now has or which may arise in the future on the account of or in any way growing out of or connected with any defects, latent or otherwise, or the physical condition of any items or lots purchased or any law or regulation applicable thereto. The indemnity clause applies to the auction and/or a privately negotiated sale, before, during and after, the auction or the privately negotiated sale, and shall survive settlement or lack thereof. Auctioneers are not responsible for accidents. Buyers must insure their own liabilities, interests, etcetera in all real estate and/or personal property. The Buyer/s also agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner, etcetera, pertaining to hazardous materials, substances, sites and/or conditions, (known or unknown), and are strictly and solely the Seller’s ownership, responsibility and liability.
35)LIMITATION OF LIABILITIES - You agree that the Auctioneer/Provider and its providers shall not be liable for any damage, loss, or expense of any kind arising out of or resulting from your possession or use of the materials, content, or information on this site (Auctioneers or Provider) or from your purchase or sale of goods through this site regardless of whether such liability is based in tort, contract, or otherwise. In no event, including without limitation, a negligent act, shall Auctioneer/Provider or any of its providers be liable to you for any direct, indirect, special, incidental, consequential, or punitive damages (including, without limitation, loss of profits, loss or corruption of data, loss of goodwill, work stoppage, computer failure or malfunction, or interruption of business, virus’s, etc.), arising out of or in any way related to the materials, content, or information on this site or any other products, services, or information offered, sold, or displayed on this site, your use of, or inability to use this site generally, or otherwise in connection with this agreement, regardless of whether Auctioneer/Provider or any of its providers have been advised of the possibility of such damages.
36)RECORDS - The records (written, audio, video, digital, computer generated and etc.) of the auction kept by the Auctioneers, Providers, bookkeepers and employees will be taken as final in the event of any disputes or claims.
37)AGENCY - The Auctioneers, licensees, employees and agents are acting as an agent for the “Seller Only” and are not responsible for acts of its principals, nor liability for damages, accidents or theft.
38)BINDING - It is agreed that the Bidder shall be bound by these terms and conditions, and if there is more than one bidder, the obligations imposed by these terms and conditions, shall be joint and several. If any term or condition is determined by a court to be unenforceable, the remainder of the terms and conditions shall not be affected. All terms and conditions shall survive settlement or lack thereof.
39)ABSENTEE BIDS & PROCEDURE - All absentee bids are handled by the online auction system of bidding. Buyer understands that all terms and conditions posted herein including addendums and attachments, apply to absentee bids as well. Because of the random nature of the auction bidding process, it is possible for the high bid to be by another Bidder, at the same amount that was left by the Absentee Bidder, therefore, it is agreed by the Absentee Bidder that neither the Sellers, Auctioneers, licensees, employees nor representatives, including the online auction service provider assume any liability or responsibility of any kind whatsoever for failure to execute bids for or on behalf of the Absentee Bidder for any reason whatsoever.
40)CREDIT CARD DISCLAIMER - Registrant/Bidder/Buyer understands that the Auction Company assumes no liability for security of credit card numbers on Auctioneers site, emails, etc., including the auction system Provider’s site.
Thank you for Thinking Auction and Choosing Hostetter Auctioneers!
Sherman Hostetter Group LLC
Hostetter Auctioneers
7055 Big Beaver Blvd.
Beaver Falls, PA 15010
Office: 724-847-1887
Email: [email protected]
Website: www.HostetterAuctioneers.com